Your logo on your box.

BRAND costs $450 one time per container unit and puts a 24 by 48 inch removable vinyl logo on both long sides. We apply it in the Gypsum yard before delivery, so the container arrives at your job already reading as part of your operation.

This is a practical sign package, not a custom paint job. You send the artwork, approve an emailed proof and get the same mark on two sides. The small JOLT mark remains on the end wall. BRAND works on every JOLT storage container and office container, while fence, light towers, heaters, traffic control and hand-wash stations are not branded.

What does BRAND cost and what do you get?

The price is $450 per unit, charged once. It is not monthly rent and it does not repeat on later invoices. The line covers your logo produced as removable vinyl at 24 by 48 inches, with one panel on each long side of the selected container. The work happens before the truck leaves the yard.

That distinction matters when you compare the full price sheet. Container rent continues each month. Delivery is priced by the job address. Recurring upgrades bill with rent. BRAND is a separate one-time line tied to the container receiving the graphics. If you reserve three branded containers, each unit needs its own BRAND line because each one gets two panels.

The published price covers the defined panel, material and placement. Extra panels, a second design, unusual production work or a redo sit outside the standard package; if your sign plan needs one of them, ask before approving the reservation and we will price it in writing.

Sales tax is added at checkout according to the job address, and every published figure is pre-tax. Your reservation deposit is separate and is applied to the first invoice. The deposit depends on the unit you select, not on the artwork. Review the container, delivery and protection lines on pricing before you approve the order.

Where does the logo go on the unit?

We place the panels at eye height on the long sides, clear of doors and windows. That position lets the mark face the normal approaches to the box without interfering with the parts your crew uses. A person walking up from either side can identify the unit before reaching the door.

The exact open area changes with the container. A plain 20 ft storage container has broad long walls and cargo doors at the end. A 20 ft office container adds a personnel door and windows, so the artwork has to sit in a clear wall section rather than across an opening. We account for the selected unit when we lay out the proof.

The small JOLT mark stays on the end wall. Your panels do not cover it, and BRAND does not turn the rental into an unmarked customer-owned container. Your logo and JOLT's fleet identification do different jobs: one identifies your company on the site, and the other keeps the rental unit identifiable through delivery, service and pickup.

A tagline or phone number can sit under your mark within the same 24 by 48 inch panel. Keep that supporting line short enough to read from a working distance. The panel size does not grow when a tagline is added, so every extra word competes with the logo for space. A short trade name and direct phone number usually read more clearly than a list of services.

Placement is confirmed in the proof. Check which direction the unit will face, where crews enter and which side the public sees. If the job has a fence wrap, gate sign or general contractor sign board, use the same logo version and wording so the container belongs to the same site package. The jobsite setup checklist can help your team coordinate the unit, access and sign plan before delivery day.

Which units can be branded?

Every container unit can take BRAND. That includes the 10 ft, 12 ft, 20 ft and 40 ft storage units; all three 20 ft office tiers; and the 40 ft office with a bathroom. The common rule is simple: if it is a JOLT storage or office container, it can carry the two vinyl panels.

The choice between storage sizes should come from your tools, available space and rental term—not from branding. The compact 10 ft storage container and 12 ft storage container can carry the same standard panel as the larger storage boxes. The 40 ft storage container gives you more floor, but BRAND remains the same two-panel package.

Office tier selection works the same way. Choose Base for the standard working office, Grid-Free when the built-in site systems fit the job, or Alpine for its mountain envelope. BRAND does not alter the tier or replace any included feature. It adds your mark to the available wall sections.

The 40 ft office with bathroom can also be branded. Its doors, windows and longer wall determine the final clear position shown in the proof. On every office, the vinyl stays clear of openings and operating hardware.

Fence and equipment do not take BRAND. If your reservation combines a branded container with temporary fence, a light tower or other equipment, the logo applies only to the named container.

What artwork do you send?

Send a vector file if you have one. SVG, PDF or AI artwork gives the cleanest source because the mark can be sized without turning edges soft. If no vector file exists, send the highest-resolution PNG you have. Do not enlarge a small screenshot and expect it to cut like original artwork.

One to three flat colors reproduce best across a 48-inch panel. Fine gradients, hairline rules and small text may look acceptable on a monitor but lose clarity when viewed from across a jobsite. A simpler mark stays readable through changing light, dust and the normal distance between a truck lane and the container wall.

Use the logo version your company is authorized to display. If the project is a joint venture, or the general contractor controls the site sign package, settle that approval before sending the file. Under section 14 of the Rental Agreement Terms, you represent that you own or are licensed to use the logo you supply. That is your responsibility, not a permission JOLT can grant.

Include the exact wording you want under the mark. A tagline or phone number can fit inside the same 24 by 48 inch panel, but it should be treated as part of the approved design. Send the final number and spelling rather than asking us to pull them from a website or an old truck photo. This avoids carrying an outdated phone number onto a unit that may remain on site for months.

We send a proof by email before the vinyl is cut. The proof is the point to check logo version, proportions, colors, wording and general placement. Look at it on a larger screen if possible. Have the person who owns your brand standards approve it, and reply from an address your project team monitors.

The proof does not change the normal delivery window. Standard delivery is 2–4 weeks, and branding is prepared as part of the yard work before dispatch. Do not wait until the truck is loading to resolve artwork. The overview of reservation, preparation and placement is on how it works.

What should your artwork email include?

Name the project and the unit on the order. Attach the vector file or best PNG. State whether the panel needs only the logo or also a tagline or phone number. Identify the person who can approve the proof. If the project has a required sign standard, include the relevant logo-use direction with the artwork rather than after production.

Keep the request within the standard package unless you have asked about an exception. Alternate panel counts, special sizes and production changes are priced in writing; send the file and we will tell you whether it fits the standard panel.

How does pickup work, and who owns the vinyl?

The vinyl remains JOLT property as applied. You rent the container, and the graphics applied under BRAND stay with JOLT's control through the rental. Do not peel them off, cut them, paint around them or move them to another surface. We handle the unit and its applied kit at pickup.

Section 14 of the Rental Agreement Terms states the ownership rule in one sentence: the customer graphics are removable vinyl and remain JOLT property as applied. The same section says you represent that you own or are licensed to use the logo. Read that section before supplying artwork because it governs the order.

The section also covers site photography. JOLT may photograph a branded unit on site for JOLT marketing unless you opt out in writing before delivery. If your project, owner or client does not allow that use, send the opt-out in writing before the delivery date. Do not rely on a note given after the unit lands.

Removal is not a customer task. BRAND uses removable vinyl so the unit can return to fleet condition after pickup, and we take the panels off in the yard. The normal pickup process still applies to the container, including the required written notice after the minimum term.

Before pickup, clear your material from storage and personal items from an office. Leave the panels alone. Make sure our truck can reach the unit and that the path is clear. The contract's pickup terms are in section 16, while branding ownership and photography remain in section 14.

If your company changes its logo during the rental, call before touching the existing panels. A replacement or redesign is outside the standard package and is priced in writing before any work.

Why brand a rental you give back?

Because the container works as a large site identifier during the months you use it. On a street lined with rental steel, a clear mark tells crews, deliveries and inspectors which box belongs to your operation. The value exists while the unit is working, not after it returns to the yard.

A branded unit can carry the general contractor's sign package from day one. It arrives with the mark already applied, so your superintendent is not finding a ladder, cleaning a cold steel wall or assigning field labor to hang a temporary banner. The container lands, the truck clears the access and the sign is already in place.

That visibility helps with ordinary directions. “Meet at the marked office” is more useful than “look for the beige box past the second gate.” A delivery driver can distinguish your storage box from another trade's container. A new worker can find the site office without trying every personnel door. The mark turns a common piece of rental steel into a fixed reference point for the project.

Identification also makes the unit harder to walk off with unnoticed. A 24 by 48 inch logo on both long sides is visible when the box is approached or moved. BRAND is not a theft-prevention system and does not replace locks, access control or site procedures, but an unmistakably marked unit is easier for your team to recognize. For active security measures, read how to secure a jobsite from theft and consider WATCH.

Branding is especially useful where owners, neighbors or the public can see the job. It puts the contractor responsible for the work on a clean, repeatable sign surface rather than on a loose banner. It also gives the site team a consistent visual anchor across phases as tools move, fence lines shift and subcontractors rotate.

The package does not change who owns the rental unit, who writes the contract or when pickup occurs, and it does not give you the right to alter the container. It gives your approved mark a defined place for the rental period, under the branding terms you accept.

For a broader setup plan, the construction jobsites solution connects offices, storage, power, cameras, fence and equipment. BRAND is one visible layer in that system. It works best when the unit placement, gate, truck access and superintendent's office are decided together.

How do you add BRAND to a reservation?

Select your container first, then add BRAND in the reservation flow. The choice is attached to that unit so the yard knows which box receives the graphics. If more than one container needs a logo, confirm the branding line on each one rather than leaving the quantity implied.

1. 01

   Choose the unit

   Pick the storage size or office tier that fits the work. BRAND is available on every container unit and does not change its rent, minimum term or delivery zone.

2. 02

   Add BRAND

   Tick BRAND for the selected unit in the reservation flow. The one-time $450 line covers the standard two-panel package for that unit.

3. 03

   Send the artwork

   Email a vector SVG, PDF or AI file, or your highest-resolution PNG. Include final wording and the person authorized to approve the layout.

4. 04

   Approve the proof

   Check the emailed proof before the vinyl is cut. Confirm the logo, any tagline or phone number, and the general placement on the selected container.

5. 05

   Prepare for delivery

   Keep the truck path and placement area ready. We apply the panels in the yard and deliver the branded unit on our own truck.

BRAND is applied in the yard, so the clean path is to add it at reservation. If the need appears after delivery, call 970-279-1015 during business hours and we will tell you whether a site application can be scheduled; do not apply or modify graphics yourself in the meantime.

Adding BRAND later does not require a new rental contract, but the branding terms still apply and the artwork still needs approval. Branding has no rush option; give the yard time to check the file, produce the proof and prepare the vinyl before asking for a date.

If the initial reservation is not yet complete, use the reserve page and select the unit and branding together. For artwork questions or a nonstandard request, use contact or email reserve@joltrents.com. The contact form asks for your name, mobile, what you need and job ZIP, then shows the price sheet when submitted.

Check the site before ordering. The branding is ready when the unit arrives, but the truck still needs a firm, level, well-drained placement area, clear access, overhead clearance and a representative present. Utilities must be located and marked, and you are responsible for permits and consents. The delivery requirements are in section 5 of the Rental Agreement Terms.

Once the unit, job ZIP and window are set, BRAND is a short sequence: add the line, send usable artwork, approve the proof and leave the application to us. Your crew gets a marked office or storage box without a field installation task.

Reserve with branding